CLF10 sc Szabad klór mintavétel

CLF10 sc Szabad klór mintavétel
Termékszám: LXV45A.98.21022
Egységár Elérhetőségünk

Disinfection under control

Hach's self diagnostics alerts you when the process has changed or when the instument needs servicing. Diagnostic features include the Cal Watch algorithm for warning of pH and chlorine calibration deviation and a non-contacting sample flow sensor for notification of insufficient sample flow. All warnings are easy to configure.

Minimal operation costs

The amperometric sensors monitor chlorine concentration continuously without reagents. There is no need to replace reagents nor to manage disposal. This saves time and keeps operation costs at a low level.

Plug and play

The sensors are designed for all Hach digital SC controllers so you only need one controller for all measurements. They are easy to operate, no matter if measuring turbidity or chlorine. Hach SC controllers have no complicated wiring or setup procedures. Just plug in any Hach digital sensor and it’s ready to use without software configuration.

Real-time process control

Continuous readings indicate when treatment conditions have changed allowing CLT10 sc and CLF10 sc a real-time control of disinfection processes.

EPA compliant according to Method 334.0

In accordance with the US EPA Method 334.0, the sensors can be used for reporting chlorine residual measurements.

A doboz tartalma

Free chlorine sensor, chlorine sensor block, SC Gateway, stainless steel panel and pH flow cell for grab samples

Műszaki adatok

A doboz tartalma: Free chlorine sensor, chlorine sensor block, SC Gateway, stainless steel panel and pH flow cell for grab samples
Anyag: Panel: Corrosion-resistant, fully-submersible (stainless steel, PVC, silicon rubber and polycarbonate)
Áramellátási követelmények (feszültség): 12 V DC ±10%, 100 mA maximum (supplied by SC controller)
Átmérő: 25 mm
Csatlakozó: Metric
Detektálási határ: 30 ppb (0.03 ppm)
Felszerelési mód: Flat, vertical surface
Garancia: 24 hónap
Hőmérséklet kompenzáció: Internal temperature compensation in the sensor
  Internal temperature compensation in the sensor
Hossz: Sensor: 195 mm
Includes: Free chlorine sensor, chlorine sensor block, SC gateway, stainless steel panel and pH flow cell for grab samples
Interferenciák: Free chlorine: monochloramine, chlorine dioxide, ozone, and chalk deposits.
Total chlorine: chlorine dioxide, ozone and chalk deposits
Ismételhetőség: 30 ppb or 3%, amelyik nagyobb
Kábel csatlakozás: 5 pin, M12 connector
Kábel hossz: 1 m (between gateway and SC controller)
Kalibrációs módszer: 1-point or 2-point (zero and slope) calibration
Lefolyócső csatlakozás: 1/2 in ID
Mérés módszer: Reagentless, electrochemical, three-electrode amperometric system
Méréstartomány: 0 - 20 ppm Cl₂
Méretek: mm x 25 mm (7.68 in x 0.98 in)
  Sensor Only: 195
Méretek (MxSZxM): 483 mm x 495 mm x 151 mm
Mintaáram: 30 - 50 L/h, optimal is 40 L/hour
Minta hőmérséklet: 5 - 45 °C
Mintavezeték csatlakozás: 1/4 in OD
Működési hőmérséklet tartomány: 0 - 50 °C (assured temperature compensation up to 45 °C)
Nyomástartomány: 0.5 bar, no pressure impulses and/or vibrations
Paraméter: Free Chlorine
pH tartomány: 4 - 9
Pontosság: Free Chlorine: ±10 % of the reference test (DPD) at stable pH less than 8.5 (±0.5 pH unit from the pH at calibration)
  Total Chlorine: ±10 % of the reference test (DPD) at stable pH less than 8.5 (±0.5 pH unit from the pH at calibration)
  Total Chlorine: ±20 % of the reference test (DPD) at stable pH greater than 8.5
Precizitás (RDS): Free Chlorine: ±3 % of the reference test (DPD) at constant pH less than 7.2 (±0.2 pH unit)
Súly: Approximately 5.5 kg (12 lbs)
Panel and empty panel-mounted components only
Szállítási tömeg: Kb. 9.1 kg
Tanúsítványok: CE/ETL, EMC
Tárolási feltételek: -20 °C - 60 °C dry
Válaszidő : Total Chlorine: 100 s or less for 90% change (T90) at a stable temperature and pH
  Свободен хлор: 140 s секунди или по-малко при 90 % промяна (T90) при стабилна температура и pH
Vezérlő: Panel only
Vezérlő kompatibilitás: SC200, SC1000, SC4500. All controllers sold separately
Width: 495.3 mm