A doboz tartalma:
EZ1031sc Phosphate Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets and 1 x empty 2.5L Reagent Container with Fittings (for Colour Solution)
Analóg kimenetek:
Active 0 - 20 mA (or 4 - 20 mA) max. 500 Ohm load, standard: 4, optional: 8
Anyag:
Hinged part: Thermoform ABS, door: PMMA
Wall section: Galvanised steel, powder coated
Automatikus tisztítás:
Yes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
Demineralised water:
Internal dilution option: Rinse water & Dilution water
Detektálási határ:
No Dilution
0.02 - 1 mg/L PO₄-P: 0.02 mg/L
0.05 - 2.5 mg/L PO₄-P: 0.05 mg/L
0.05 - 5 mg/L PO₄-P: 0.05 mg/L
0.1 - 10 mg/L PO₄-P: 0.1 mg/L
Internal Dilution
0.5 - 50 mg/L PO₄-P: 0.5 mg/L
1 - 100 mg/L PO₄-P: 1 mg/L
2.5 - 250 mg/L PO₄-P: 2.5 mg/L
5 - 500 mg/L PO₄-P: 5 mg/L
7.5 - 750 mg/L PO₄-P: 7.5 mg/L
10 - 1000 mg/L PO₄-P: 10 mg/L
Digitális kimenetek:
Profibus DP or Modbus RTU
Earth connection:
Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²
Garancia:
24 hónap
Instrument air:
Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air. Used to flush the instrument in corrosive environement. Min. 0.2 bar - Max. 0.5 bar
Interferenciák:
Positive interferences may be caused by arsenate (AsO₄³⁻) and, under heated conditions, by silica or silicate (SiO₄-)
Reducing substances such as sulfide (S²⁻), thiosulfate (S₂O₃²⁻), thiocyanate (SCN⁻), and excess molybdate (MoO₄²⁻) may interfere at high concentrations. The following ions do not cause interference at concentrations up to 1,000 mg/L: aluminium, ferric iron, magnesium, calcium, barium, strontium, lithium, sodium, potassium, ammonium, cadmium(II), manganese(II), lead(II), mercury(I), mercury(II), tin(II), copper, nickel, silver(I), uranium(IV), zirconium(IV), arsenite, bromide, carbonate, perchlorate, cyanide, iodate, nitrate, nitrite, sulfate, sulfite, pyrophosphate, tetraborate, selenate, benzoate, citrate, oxalate, lactate, tartrate, formate, and salicylate.
Large quantities of color and turbidity interfere. Fats, oil, proteins, surfactants and tar interfere.
Kalibrálás:
Automatic; 2-point; offset or slope; Frequency freely programmable: 6 hours, 12 hours, daily, weekly. Note: manufacturer recommends that a calibration is done when the reagents are replaced
Kimenet :
Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP
Környezeti hőmérséklet:
10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing)
Lefolyócső:
Atmospheric pressure, vented, min. Ø 32 mm
Mérés módszer:
Colorimetric measurement vanadates yellow method compliant with APHA 4500-P (C)
Méréstartomány:
No Dilution
0.02 - 1 mg/L PO₄-P
0.05 - 2.5 mg/L PO₄-P
0.05 - 5 mg/L PO₄-P
0.1 - 10 mg/L PO₄-P
Internal Dilution
0.5 - 50 mg/L PO₄-P
1 - 100 mg/L PO₄-P
2.5 - 250 mg/L PO₄-P
5 - 500 mg/L PO₄-P
7.5 - 750 mg/L PO₄-P
10 - 1000 mg/L PO₄-P
Méretek (MxSZxM):
688 mm x 460 mm x 340 mm
Minta: nyomás:
By external overflow vessel (open to atmospheric pressure)
Mintaáram:
100 - 300 mL/min
Mintacellák:
No Dilution
Default: 10 min.
Continuous: 9 min.
Internal Dilution
Default: 15 min.
Continuous: 12 min.
Minta hőmérséklet:
5 - 30 °C
Minta minőség:
Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU
Mintautak száma:
Standard: 1
Optional accessory for 2, 4, or 8 sample streams
Paraméter:
Phosphate (vanadate yellow)
Pontosság:
Better than 2% full scale range for standard test solutions
Reagent Requirements:
Keep between 10 - 30 °C
Relék:
5 contacts, not user configurable: Malfuntion, maintenance, analysis ready, sample ready, sample ready (EZ9150)
Súly:
Max. 35 kg
Tanúsítványok:
CE, ETL certified to UL and CSA safety standards, UKCA
Teljesítmény:
100 - 240 VAC, 50/60 Hz
Max. power consumption: 120 VA
Validation:
Automatic; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
Védettségi osztály:
IP44